SBS modified bitumen roofing waterproofing membrane

1.Good Cost Performance 2.Low requirement for base surface 3.Adhesion Reliable 4.Environment-friendly 5.ISO certification

SBS modified bitumen roofing waterproofing membrane

                                                                    

 

Product Detail

SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane etc.

 

Applicable scope

Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, SBS modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement.

 

 

Package and transportation

1.  Membranes should be stored under dry and ventilated conditions.

2.  Different types of membranes must be piled separately.

3.  Under usual condition, storage period is one year since production date.

4.  Membrane roll should be put vertically during transportation. It should be kept away from sunshine and rainwater.

                                                        

Technology

SBS Technical data Confirming to GB/T18243-2008
No.	Item		I		II
			PY	G	PY	G
1	Soluble content/(g/m2)≥	3mm	2100
		4mm	2900
		5mm	3500
		Test	-	No flame	-	No flame
2	Heat Resistance	°C	90		105
		≤mm	2
		Test	no flow no dripping
3	Low temperature flexibility/°C		-20		-25
			no crack
4	Impermeability 30minutes		0.3Mpa	0.2MPa	0.3MPa
5	Tension	Maximum/(N/50mm)	500	350	800	500
		Secondly-Maximum	-	-	-	-
		Test	no crack no apart
6	Elongation	Maximum≥	30	-	40	-
		Secondly-Maximum ≥	-		-
7	Weight increase after immersion in water/%	PE.S	1.0
		M	2.0

 

 

SBS modified bitumen roofing waterproofing membrane