1000*333mm Hot Sale mix color Roof Tile Shingles

1.Colorful glass mosaic tile 2.Used for wall, floor, swimming pool 3.Size & color can be customized 4.Thickness 4, 5, 6, 8mm

                                       1000*333mm Hot Sale mix color Roof Tile Shingles

 

 CHARACTERISTIC

1.Weather resistance: It is made by saturating the modifier in bitumen, reinforced with high-strength fiberglass, to resist the erosion caused by light, hot and cold, rainwater, freeze and so on,

2.Thermal insulation: Its thermal conductivity is pretty low, so it could block the Conduction and dissipation of the heat.

3.Light weight: It only needs about 10kg per square, Compared to the 45kg per square of traditional glass tile.

4.Various color: The color can be made according to your requirements.

5. Sound-absorbing and sound-proofing: It can absorb the noise when raindrop impacts.

6. Economy: It is much cheaper than the traditional glass tile.

 

INDEX

Soluble content	Flat tile ≥1000/m2
	Lapped tile≥1800g/m2
Tension	Longitudinal≥500N/50mm
	Transverse ≥400N/50mm
Heat resistance	90°C	No slippering, no flowing, no dripping, no bulking
Low temperature flexibility	-10°C	No crack

 

USAGE

Best usage for Interior and Exterior, floor and wall.

Best usage for room, swimming pools, bathroom, kitchen room etc!

 

CONSTRUCTION  STEPS

(1) We suggest to adopt professional adhesives and joint filler, and parts of our products adopt neutral adhesives. (See interior instruction)

(2) Use special ash knife to sweep 2-3mm thickness adhesives after cleaning the pavement surface.

(3) Use dentation trowel carve to score out waviness on the flat mushy adhesive.

(4) Paving mosaic pay attention to align the joints between mosaics with the joints between the product network adhibits.

(5) Tenderly pat the surface of the mosaic and leveling treatment to make sure it is adhesive evenly.

(6) About 20 hours later when mosaic is totally adhesive, use the special sponge knife to fill the joint fillers in the gaps. (Soft tool to prevent damaging product surface)

(7) After 30 minutes, when the joint filler is semi-dry, use high density sponge to fill into joint about 1-2mm, which can better show the highlight effect of the product.

(8) Use dry towel to clean and finish the construction finally.

1000*333mm Hot Sale mix color Roof Tile Shingles